EGR Cooler Installation Bolt Installation Note
WARNING: This page is about a different variant/trim than selected.
- Install the EGR cooler installation bolts.
 Courtesy of MAZDA MOTORS CORP.
|
Tightening torque
A: 20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}
B: 8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}
- Install the vacuum pipe.
 Courtesy of MAZDA MOTORS CORP.
|
Tightening torque
8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}
- Connect the vacuum hose as shown in the figure.
 Courtesy of MAZDA MOTORS CORP.
|