U.S.A. and CANADA: Notes
WARNING: This page is about a different variant/trim than selected.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION ).
- Remove the floor under cover No. 2 (LH). (See FLOOR UNDER COVER REMOVAL/INSTALLATION ).
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
PART DESCRIPTION
| 1 | Quick release connector (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION ). |
| 2 | Evaporative hose No. 1 (See Evaporative hose No. 1 installation note ). |
| 3 | Evaporative hose No. 2 (See Evaporative hose No. 2 installation note ). |
| 4 | Middle harness connector |
| 5 | Charcoal canister component (See Charcoal canister component installation note ). |
| 6 | CV solenoid valve connector |
| 7 | Fuel tank pressure sensor connector |
| 8 | Charcoal canister bracket No. 1 |
| 9 | Charcoal canister |
| 10 | Wiring harness |
| 11 | Charcoal canister bracket No. 2 |