LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel System (VIN Y)) >> Fuel-Filler Pipe Removal/Installation >> Fuel-filler Pipe Installation Note

Fuel-filler Pipe Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily install the fuel-filler pipe to the vehicle-side stud bolt.
    Fig 1: Fuel-Filler Pipe, Stud Bolt, Nut And Bolt With Torque Specification
    G12184341Courtesy of MAZDA MOTORS CORP.
  2. Temporarily tighten bolt A.
  3. Completely tighten bolt B.
  4. Completely tighten bolt C.
  5. Completely tighten bolt A.
  6. Completely tighten the nut.
scientia non olet · About LEMON Manuals