Tel Antenna Removal/Installation

TEL Antenna No. 1 

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION ).
2. Remove the center speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION ).
3. Remove the screw.

   Courtesy of MAZDA MOTORS CORP.

4. Disconnect the connector.
5. Remove the TEL antenna No. 1.
6. Install in the reverse order of removal.

TEL Antenna No. 2 

• TEL antenna No. 2 is integrated with the global positioning system (GPS) antenna.
• For TEL antenna No. 2 removal/installation, refer to GPS ANTENNA REMOVAL/INSTALLATION. (See GLOBAL POSITIONING SYSTEM (GPS) ANTENNA REMOVAL/INSTALLATION ).