Front Parking Sensor Buzzer Inspection

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION ).
2. Remove the following parts:
   1. Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION ).
   2. Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION ).
   3. Lower decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION ).
   4. Front parking sensor buzzer (See FRONT PARKING SENSOR BUZZER REMOVAL/INSTALLATION ).
3. Verify the continuity between front parking sensor buzzer terminals A and B.

Courtesy of MAZDA MOTORS CORP.

Courtesy of MAZDA MOTORS CORP.

• If not as indicated in the table, replace the front parking sensor buzzer. (See FRONT PARKING SENSOR BUZZER REMOVAL/INSTALLATION ).