LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Front CROSSMEMBER Under Cover Removal/Installation

Front CROSSMEMBER Under Cover Removal/Installation

  1. Lift up the vehicle.
  2. Remove the bolts.
    Fig 1: Front Crossmember Under Cover Bolts With Torque Specification
    G13490999Courtesy of MAZDA MOTORS CORP.
  3. Remove the front crossmember under cover.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals