LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-9 Sport, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Front Side Trim Removal/Installation

Front Side Trim Removal/Installation

  1. Remove the front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  2. Partially peel back the seaming welt.
    G11434943Courtesy of MAZDA MOTORS CORP.
  3. Remove the cap nut.
    G11434944Courtesy of MAZDA MOTORS CORP.
  4. Pull the front side trim out of the stud bolt.
    G11434945Courtesy of MAZDA MOTORS CORP.
  5. Hold the shaded area shown in the figure, move the front side trim in the direction of the arrow, and detach the clip.
  6. Remove the front side trim.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals