Simulation item table

WARNING: This page is about a different variant/trim than selected.

SIMULATION ITEM DESCRIPTION

Item	Description	Unit/Condition	Operation condition
SS_ON-OFF	On/off solenoid condition	Off/On	Under the following conditions: Vehicle stopped Idling at P or N position
SS1_C	Shift solenoid No. 1 target current	A	Under the following conditions: Vehicle stopped Idling at P or N position
SS2_C	Shift solenoid No. 2 target current	A	Under the following conditions: Vehicle stopped Idling at P or N position
SS3_C	Shift solenoid No. 3 target current	A	Under the following conditions: Vehicle stopped Idling at P or N position
SS4_C	Shift solenoid No. 4 target current	A	Under the following conditions: Vehicle stopped Idling at P or N position
SSLU_C	TCC control solenoid target current	A	Under the following conditions: ATF temperature (PID: TFT) is 20 °C {68 °F} or more. Output shaft speed (PID: OSS) is 10 rpm or more. Turbine/input shaft speed (PID: TSS) is 1, 000 rpm or more. Brake pedal released
SSP_C	Pressure control solenoid target current	A	Idling at P or N position