Function Inspection Using M-MDS

WARNING: This page is about a different variant/trim than selected.

DIAGNOSTIC PROCEDURE - FUNCTION INSPECTION USING M-MDS

STEP	INSPECTION	RESULTS	ACTION
1	PURPOSE: VERIFY RELATED REPAIR INFORMATION AVAILABILITY Verify related Service Bulletins and/or on-line repair information availability. Is any related repair information available?	Yes	Perform repair or diagnosis according to the available repair information. If the vehicle is not repaired, go to the next step.
1		No	Go to the next step.
2	PURPOSE: RECORD FREEZE FRAME DATA/SNAPSHOT DATA AND DIAGNOSTIC MONITORING TEST RESULTS TO UTILIZE WITH REPEATABILITY VERIFICATION NOTE: Recording can be facilitated using the screen capture function of the PC. Record the FREEZE FRAME DATA/snapshot data and DIAGNOSTIC MONITORING TEST RESULTS (EVAP system related) on the repair order.	-	Go to the next step.
3	PURPOSE: VERIFY IF DIAGNOSTIC RESULT IS AFFECTED BY MALFUNCTION OF CONTROL PART REQUIRED FOR DIAGNOSIS Perform the Pending Trouble Code Access Procedure and DTC Reading Procedure. (See ON-BOARD DIAGNOSTIC TEST .) Is the PENDING CODE/DTC P0112:00, P0113:00, P0116:00, P0117:00, P0118:00, P0443:00, P0446:00, P0451:00, P0452:00, P0453:00, P0460:00, P0461:00, P0462:00, P0463:00, P2227:00, P2228:00 or P2229:00 also present?	Yes	Go to the applicable PENDING CODE or DTC inspection. (See DTC P0112:00 .) (See DTC P0113:00 .) (See DTC P0116:00 .) (See DTC P0117:00 .) (See DTC P0118:00 .) (See DTC P0443:00 .) (See DTC P0446:00 .) (See DTC P0451:00 .) (See DTC P0452:00 .) (See DTC P0453:00 .) (See DTC P0460:00 .) (See DTC P0461:00 .) (See DTC P0462:00 .) (See DTC P0463:00 .) (See DTC P2227:00 .) (See DTC P2228:00 .) (See DTC P2229:00 .)
3		No	Go to the Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.