DTC P130C-00: Pre-Ignition Detected: Notes
WARNING: This page is about a different variant/trim than selected.
DTC P130C:00 (PCM, VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE
| DTC P130C:00 |
Pre-ignition detected |
| DETECTION CONDITION |
- Pre-ignition is detected a few times continuously. Diagnostic support note
- This is a continuous monitor (other).
- The PCM turns the master warning light on in the first drive cycle, and turns the master warning light and check engine light on in the second drive cycle.
- FREEZE FRAME DATA/Snapshot data is available.
- DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
- The PCM performs fuel cut or restricts the engine torque.
|
| POSSIBLE CAUSE |
- Fuel having octane rating lower than specified fuel is used
- Carbon accumulated in combustion chamber
- PCM malfunction
|
| SYSTEM WIRING DIAGRAM |
|