Starter Does Not Work: Notes
WARNING: This page is about a different variant/trim than selected.
STARTER DOES NOT WORK (GW6A-EL, GW6AX-EL) DESCRIPTION AND POSSIBLE CAUSE
| TROUBLESHOOTING ITEM |
Starter does not work |
| Description |
- Starter does not work even when in P or N position.
|
| POSSIBLE CAUSE |
- Wiring harness between TCM terminal J and PCM terminal 2BD (VIN Y)/2AI
malfunction
- Wiring harness between TCM terminal J and start stop unit terminal 1F malfunction
- Wiring harness between start stop unit terminal 2H and LF control unit terminal G malfunction (With advanced keyless entry system)
- Immobilizer system operating or system malfunction
- Engine control system malfunction
|