Diagnostic Procedure

WARNING: This page is about a different variant/trim than selected.

ATF SEEPING FROM AUTOMATIC TRANSAXLE (GW6A-EL, GW6AX-EL) DIAGNOSTIC PROCEDURE

Step	Inspection	Results	Action
1	VERIFY IF THE MALFUNCTION CAUSE IS ATF LEAKAGE Verify if ATF is leaking from the locations described above. Is there ATF seeping from a location?	Yes	Verify the installation and damage condition of the part at the location where the ATF is seeping and repair or replace the malfunctioning part.
1		No	Symptom troubleshooting is completed.