DTC P0610-00: Pcm Vehicle Configuration Error: Notes

WARNING: This page is about a different variant/trim than selected.

DTC P0610:00 (PCM, VIN Y) DETECTION CONDITION AND POSSIBLE CAUSE

DTC P0610:00	PCM vehicle configuration error
DETECTION CONDITION	PCM data configuration error. Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA/Snapshot data is available. DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	Not applicable
POSSIBLE CAUSE	Configuration procedure has not been completed PCM connector or terminals malfunction PCM malfunction
SYSTEM WIRING DIAGRAM	Not applicable