Related PIDs

WARNING: This page is about a different variant/trim than selected.

PID PART SPECIFICATION

Item (definition)	Unit/Condition	Definition	Condition/Specification (Reference)
FUEL_PRES	KPa {MPA}, mBar {BAR}, psi, in H20	Fuel pressure input from high fuel pressure sensor	Displays fuel pressure
	KPa {MPA}, mBar {BAR}, psi, in H20	Fuel pressure (absolute) input from high fuel pressure sensor	Displays fuel pressure (absolute)
	V	High fuel pressure sensor voltage	Ignition switched ON (engine off) Fuel pressure is approx. 16.91 MPa {172.4 kgf/cm ² , 2453 psi}: Approx. 2.91 V Idle (after warm up) Fuel pressure is 3.44-3.95 MPa {35.1-40.2 kgf/cm ² , 499-572 psi}: 0.98-1.05 V (ECT is 90 °C {194 °F})