LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Sport, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (On-Board Diagnostic - Engine Control (VIN Y) (1 Of 3)) >> DTC P0015-00: Hydraulic Variable Valve Timing Control System: Over-Retarded >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more.
  2. Shift to D position and rapidly accelerate the vehicle to 50 km/h {31 mph} (to operate hydraulic variable valve timing control).
  3. Decelerate to idling.
  4. Shift to D position and rapidly accelerate the vehicle to 50 km/h {31 mph}again.
scientia non olet · About LEMON Manuals