LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Sport, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Fuel System (VIN Y)) >> High Pressure Fuel Pump Removal/Installation >> Rear Housing Removal Note

Rear Housing Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery tray. (See BATTERY REMOVAL/INSTALLATION .)
  2. Disconnect the turbocharger air outlet pipe from the dynamic pressure turbo. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  3. Remove the vacuum pump. (See VACUUM PUMP REMOVAL/INSTALLATION .)
  4. Remove the exhaust CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)
  5. Remove the ECT sensor No. 1. (See ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION .)
  6. Remove the rear housing.
scientia non olet · About LEMON Manuals