LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Sport, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Fuel System (VIN Y)) >> High Pressure Fuel Pump Removal/Installation >> Protector Installation Note

Protector Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the protector.
    G11436397Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATION

    Tightening torque
    A: 8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}
    B: 20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}
  2. Install the ground cable to the protector.
    G11436393Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATION

    Tightening torque
    8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}
  3. Install the clip to the protector.
    G11436392Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals