LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Sport, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Front Side Trim Removal/Installation

Front Side Trim Removal/Installation

  1. Remove the front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  2. Partially peel back the seaming welt.
    G11427929Courtesy of MAZDA MOTORS CORP.
  3. Remove the cap nut from the stud bolt.
    G11427930Courtesy of MAZDA MOTORS CORP.
  4. Pull the front side trim out of the stud bolt.
    G12187728Courtesy of MAZDA MOTORS CORP.
  5. Pull the front side trim in the direction of the arrow shown in the figure and remove it while detaching the clip.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals