LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-5 Sport, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION

FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION

  1. Remove the bolts.
    Fig 1: Front Under Cover No. 1 Bolts With Torque Specification
    G11427568Courtesy of MAZDA MOTORS CORP.
  2. Remove the screws.
  3. Remove the fasteners.
  4. Remove the front under cover No. 1.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals