On-Board Diagnostic - Instrument Cluster

• Active Command Modes Inspection [Instrument Cluster]
• Active Command Modes Table [Instrument Cluster]
• Clearing DTC [Instrument Cluster]
  • CMDTC Memory Clearing Procedure
  • ODDTC Memory Clearing Procedure
• DTC Inspection [Instrument Cluster]
  • CMDTC Self Test
  • ODDTC Self Test
  • Snapshot Data
• DTC Table [Instrument Cluster]
• DTC U0001-88, U0010-88, U0100-00, U0101-00, U0104-00, U0114-00, U0121-00, U0128-00, U0131-00, U0140-00, U0142-00, U0151-00, U0156-00, U0158-00, U0159-00, U0182-00, U0214-00, U0232-00, U0235-00, U023A-00: Communication Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0300-00: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0401-68: Error Signal Received From Pcm [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0402-68: Error Signal Received From TCM [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0422-68: Error Signal Received From Front Body Control Module (FBCM) [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U0515-68: Error Signal Received From Start Stop Unit [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2005-86: Error Signal Received From Pcm [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2013-13: Cluster Switch Circuit Malfunction [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2100-00: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2105-02: Drive Selection Switch Circuit Malfunction [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-41: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-51: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-56: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U2300-57: Instrument Cluster Configuration Error [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U3000-41: Instrument Cluster Internal Malfunction [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• DTC U3003-16: Low Power Supply Voltage Input To Instrument Cluster [Instrument Cluster]
  • Notes
  • Diagnostic Procedure
• Foreword [Instrument Cluster]
  • Notes
  • Troubleshooting Procedure
  • Action For Non-repeatable Malfunction
• PID/Data Monitor Inspection [Instrument Cluster]
• PID/Data Monitor Table [Instrument Cluster]