LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Engine Starting System (VIN L)) >> Starter Inspection >> Starter Inner Parts Inspection >> Magnetic switch

Magnetic switch

WARNING: This page is about a different variant/trim than selected.
  1. Inspect for conductivity between terminals S and M using a tester.
    G09074521Courtesy of MAZDA MOTORS CORP.
    • If there is no conductivity, replace the magnetic switch.
  2. Inspect for conductivity between terminal S and the body using a tester.
    G09074522Courtesy of MAZDA MOTORS CORP.
    • If there is no conductivity, replace the magnetic switch.
  3. Verify that there is no conductivity between terminals M and B using a tester.
    G09074523Courtesy of MAZDA MOTORS CORP.
    • If there is conductivity, replace the magnetic switch.
scientia non olet · About LEMON Manuals