LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Engine Lubrication System (VIN L)) >> Oil Pump Removal/Installation >> Oil Pump Driven Sprocket Removal Note (VIN L)

Oil Pump Driven Sprocket Removal Note (VIN L)

WARNING: This page is about a different variant/trim than selected.
  1. Mark the following parts as shown in the figure.
    • Oil pump driven sprocket
    • Oil pump chain
    • Balancer unit sprocket
    G11429665Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • The marks will be used as alignment marks when installing the oil pump driven sprocket.
  2. While locking the oil pump against rotation as shown in the figure, remove the oil pump driven sprocket installation bolt.
    G11429666Courtesy of MAZDA MOTORS CORP.
  3. While pressing the oil pump chain in the direction of the arrow shown in the figure, remove the oil pump driven sprocket.
G12228921Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals