LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Engine Lubrication System (VIN L)) >> Oil Pan Removal/Installation >> Emission Wiring Harness Connector Removal Note

Emission Wiring Harness Connector Removal Note

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Cover the emission wiring harness connector and short-cord connector using tape to prevent engine oil from adhering to the connector terminal.
  1. Disconnect the emission wiring harness connector.
G12228910Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals