LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (On-Board Diagnostics - Automatic Transaxle (ET6A-El, ET6AX-El)) >> Simulation Table >> Simulation item table

Simulation item table

WARNING: This page is about a different variant/trim than selected.
SIMULATION PART DESCRIPTION

Item Description Unit/Condition Operation condition
AUX_FLD_PUMP_DUTY_COMD Displays in the M-MDS but it does not operate.
AUX_RLY_B
E_OIL_PUMP
SHIFT_SOL_A_CUR
SHIFT_SOL_B_CUR Shift solenoid No. target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_C_CUR Shift solenoid No. target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_D_CUR Shift solenoid No. target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_E_CUR Shift solenoid No. target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_ON_OFF On/off solenoid condition Off/On Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
TRQ_CON_CLTCH_CUR TCC control solenoid target current A Under the following conditions:
  • ATF temperature (PID: TFT) is 20 °C {68 °F} or more.
  • Output shaft speed (PID: OSS) is 10 rpm or more.
  • Turbine/input shaft speed (PID: TSS) is 1, 00 rpm or more.
  • Brake pedal released