DTC P0753-00: Shift Solenoid No. Circuit Malfunction: Outline

WARNING: This page is about a different variant/trim than selected.

DTC P0753:00 (TCM, ET6A-EL, ET6AX-EL, US) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Shift solenoid No. circuit malfunction
Detection condition	Under the following condition, the TCM detects the shift solenoid No. circuit malfunction: Battery voltage is 10.5 V or more.
Fail-safe	Set to emergency mode. Inhibits learning control. Inhibits manual mode. Inhibits neutral idle control. Inhibits AAS.
Possible cause	Short or open circuit in shift solenoid No. circuit Shift solenoid No. malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable