DTC P164D:00 [Pcm (SKYACTIV-G)]: Outline

WARNING: This page is about a different variant/trim than selected.

DTC P164D:00 (PCM, SKYACTIV-G) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	PCM configuration
Detection condition	PCM detects coupling component calibration data error
Fail-safe	Inhibits the i-ACTIV AWD control.
Possible cause	PCM configuration procedure is not done properly The coupling component value is not input to the PCM correctly. PCM malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable