LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (On-Board Diagnostic - Engine Control System (VIN L & VIN M) (2 Of 4)) >> DTC P064D:00 [Pcm (SKYACTIV-G (Us))] >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more.
  2. Start the engine and leave it idling for 1 min.
    NOTE:
    • Match the engine coolant temperature in the recorded freeze frame data/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
  3. Try to reproduce the malfunction by driving the vehicle for 5 minbased on the values in the freeze frame data/snapshot data.
scientia non olet · About LEMON Manuals