DTC P061B:00 [Pcm (SKYACTIV-G)]: Outline

WARNING: This page is about a different variant/trim than selected.

DTC P061B:00 (PCM, SKYACTIV-G) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Internal control module torque calculation performance problem
Detection condition	Indicates an error occurred in the PCM. There is a malfunction in the sensor input signal to the PCM. There is a malfunction between the PCM and the sensor that inputs a signal to the PCM.
Fail-safe	Engine output is restricted.
Possible cause	Error in signal input to PCM by sensor PCM connector or terminals malfunction PCM malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable