LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (On-Board Diagnostic - Engine Control System (VIN L & VIN M) (1 Of 4)) >> DTC P0126:00 [Pcm (SKYACTIV-G)] >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Switch the ignition off.
  2. Leave the vehicle until the engine coolant temperature reachesapprox. 35 °C {95 °F}.
  3. Start the engine.
    NOTE:
    • Match the engine coolant temperature in the recorded freeze frame data/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
  4. Try to reproduce the malfunction by driving the vehicle for 5 minbased on the values in the freeze frame data/snapshot data.
scientia non olet · About LEMON Manuals