DTC P0069:00 [Pcm (SKYACTIV-G)]: Outline

WARNING: This page is about a different variant/trim than selected.

DTC P0069:00 (PCM, SKYACTIV-G) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Manifold absolute pressure/atmospheric pressure correlation problem
Detection condition	The PCM monitors the difference between the intake manifold vacuum and the atmospheric pressure. If the difference is below -12 kPa {-0.12 kgf/cm² , -1.7 psi} or above 12 kPa {0.12 kgf/cm² , 1.7 psi} when the following conditions are met, the PCM determines that there is a MAP sensor performance problem. Precondition 12-15 s from when ignition is switched off.
Fail-safe	Not applicable
Possible cause	MAP sensor malfunction BARO sensor (built-into PCM) malfunction PCM malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable