DTC P0017:00 [Pcm (SKYACTIV-G)]: Outline

WARNING: This page is about a different variant/trim than selected.

DTC P0017:00 (PCM, SKYACTIV-G) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	CKP-CMP (exhaust side) correlation problem
Detection condition	The PCM monitors the input pulses from the CKP sensor and exhaust CMP sensor. If the input pulse pick-up timing do not match each other, the PCM determines that the camshaft position does not coincide with the crankshaft position.
Fail-safe	Not applicable
Possible cause	Improper valve timing Improper installation of timing chain to exhaust cam sprocket teeth Timing chain damage Exhaust cam sprocket damage CKP sensor malfunction Connector or terminals malfunction Foreign matter on CKP sensor Damaged or scratched CKP sensor pulse wheel Exhaust CMP sensor malfunction Connector or terminals malfunction Foreign matter on exhaust CMP sensor Damaged or scratched exhaust CMP sensor pulse wheel PCM connector or terminals malfunction PCM malfunction
System wiring diagram	Not applicable
Connector diagram	Not applicable