LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (On-Board Diagnostic - Engine Control System (VIN L & VIN M) (1 Of 4)) >> DTC P0015:00 [Pcm (SKYACTIV-G (VIN 7, L (Us)))] >> Repeatability Verification Procedure

Repeatability Verification Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Warm up the engine to allow the engine coolant temperature to reach80 °C {176 °F} or more.
  2. Shift to 2nd gear (MTX)/D position (ATX) and rapidly accelerate the vehicle to50 km/h {31 mph}(to operate hydraulic variable valve timing control).
  3. Decelerate to idling.
  4. Shift to 2nd gear (MTX)/D position (ATX) and rapidly accelerate the vehicle to50 km/h {31 mph}again.
scientia non olet · About LEMON Manuals