LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Engine Cooling System (VIN M)) >> Water Pump Removal/Installation >> Water Pump Component Installation Note

Water Pump Component Installation Note

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Assemble the water pump gasket to the correct direction shown in the figure. Otherwise, it could leak engine coolant and damage the engine.
    G12184227Courtesy of MAZDA MOTORS CORP.
  • Do not apply oil (such as engine oil, ATF) to the water pump gasket. Otherwise, the gasket could swell causing a seal malfunction.
  1. Insert a new water pump gasket into the water pump groove.
  2. Install the water pump.
  3. Tighten the bolts in the order shown in the figure.
    Fig 1: Water Pump Bolts Tightening Sequence
    G13174884Courtesy of MAZDA MOTORS CORP.