LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Engine Cooling System (VIN M)) >> Coolant Control Valve Removal/Installation >> Upper Radiator Hose Removal Note

Upper Radiator Hose Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the bolt shown in the figure.
    Fig 1: Coolant Control Valve, Upper Radiator Hose And Bolt With Torque Specification
    G13557053Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the upper radiator hose.
scientia non olet · About LEMON Manuals