LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical System (VIN M)) >> Timing Chain Removal/Installation >> Drive Belt Auto Tensioner Installation Note

Drive Belt Auto Tensioner Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the temporarily assembled bolt at the location shown in the figure.
    G12188724Courtesy of MAZDA MOTORS CORP.
  2. Install the drive belt auto tensioner. (See DRIVE BELT AUTO TENSIONER REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals