LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical System (VIN M)) >> Engine Tune-Up >> Ignition Timing Inspection

Ignition Timing Inspection

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The ignition timing cannot be adjusted.
  • The M-MDS is required to verify the ignition timing.
  1. Prepare for the engine tune-up. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify the ignition timing (M-MDS PID: SPARKADV) using the PID/data monitor function of the M-MDS. (See PCM INSPECTION .)

    Ignition timing (MTX: Neutral position, ATX: P position or N position) 

    Approx. BTDC 12°

  3. Verify that ignition timing advances when the engine speed increases gradually.
    • If there is a malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING".
scientia non olet · About LEMON Manuals