Resistance Inspection
WARNING: This page is about a different variant/trim than selected.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Disconnect the fuel injector connector. (See FUEL INJECTOR REMOVAL/INSTALLATION .)
- Inspect the resistance between fuel injector terminals A and B.
Fuel injector resistance
1.23-2.03 ohms [Surrounding temperature: 0-80 °C {32-176 °F}]
- If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION .)