LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Exhaust System (VIN M)) >> Exhaust System Removal/Installation >> Insulator (front) Installation Note

Insulator (front) Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Align the stud bolts shown in the figure with the insulator (front) and install.
    G13175172Courtesy of MAZDA MOTORS CORP.
  2. Install the fasteners.
  3. Tighten the nuts to the specified torque.
scientia non olet · About LEMON Manuals