LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Exhaust System (VIN L)) >> Exhaust System Removal/Installation >> Tunnel cover Installation Note

Tunnel cover Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Align the stud bolt shown in the figure with the tunnel cover and install.
    G13557350Courtesy of MAZDA MOTORS CORP.
  2. Install fastener A shown in the figure.
  3. Install the remaining fasteners.
  4. Tighten the bolts shown in the figure to the specified torque.
  5. Tighten the nuts shown in the figure to the specified torque.
scientia non olet · About LEMON Manuals