LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Exhaust System (VIN L)) >> Exhaust System Removal/Installation >> AWD >> Exhaust Manifold Insulator Installation Note

Exhaust Manifold Insulator Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily tighten the exhaust manifold insulator.
  2. Tighten the exhaust manifold insulator in the order shown in the figure.
    Fig 1: Exhaust Manifold Insulator Bolts Tightening Sequence (AWD)
    G13557334Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals