LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Exhaust System (VIN L)) >> Exhaust System Removal/Installation >> 2WD >> Exhaust Manifold Insulator Removal Note

Exhaust Manifold Insulator Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the insulator as shown in the figure.
    Fig 1: Exhaust Manifold Insulator Nut And Bolt With Torque Specification (2WD)
    G13557329Courtesy of MAZDA MOTORS CORP.
  2. Remove the exhaust manifold insulator.
scientia non olet · About LEMON Manuals