LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical System (VIN L)) >> Hydraulic Lash Adjuster (HLA) Removal/Installation >> Rocker Arm Installation Note

Rocker Arm Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Apply engine oil to the HLAs and the end of the valve stems.
    G09074228Courtesy of MAZDA MOTORS CORP.
  2. Install the rocker arms to the same positions as before removal.