LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical System (VIN L)) >> Engine Tune-Up >> Idle Speed Inspection

Idle Speed Inspection

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The idle speed cannot be adjusted.
  • The M-MDS is required to verify the idle speed.
  1. Prepare for the engine tune-up. (See ENGINE TUNE-UP PREPARATION .)
  2. Verify that the idle speed (M-MDS PID: RPM) is within the specification using the PID/data monitor function of the M-MDS. (See PCM INSPECTION .)
    • If there is a malfunction, refer to "ENGINE SYMPTOM TROUBLESHOOTING".

    Idle speed [VIN 7] (MTX: Neutral position, ATX: P position or N position) 

    MTX: 500-600 rpm

    ATX: 550-650 rpm

    Idle speed [VIN L] (MTX: Neutral position, ATX: P position or N position) 

    MTX: 560-660 rpm

    ATX: 550-650 rpm

scientia non olet · About LEMON Manuals