LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical System (VIN L)) >> Engine Disassembly/Assembly >> Exhaust Manifold Bracket No. 1 Removal Note

Exhaust Manifold Bracket No. 1 Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the bolt shown in the figure.
    G13174229Courtesy of MAZDA MOTORS CORP.
  2. Remove the bolts in the order shown in the figure, then remove the exhaust manifold bracket No. 1.
    Fig 1: Exhaust Manifold Bracket No. 1 Bolts Loosening Sequence
    G13174230Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals