LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical System (VIN L)) >> Engine Disassembly/Assembly >> Exhaust Manifold Bracket Installation Note (2WD)

Exhaust Manifold Bracket Installation Note (2WD)

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily tighten the exhaust manifold bracket installation bolts.
  2. Tighten the bolt in the order shown in the figure.
    Fig 1: Exhaust Manifold Bracket Bolts Tightening Sequence
    G13174231Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals