LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Conventional Brake System) >> Rear Brake Caliper Disassembly/Assembly (Us) >> Bleeder Screw Disassembly Note

Bleeder Screw Disassembly Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When removing the bleeder screw from the caliper body, always plug and seal the caliper body so that brake fluid does not leak.
  1. After removing the bleeder screw, plug the bleeder screw installation hole.
scientia non olet · About LEMON Manuals