Remote Tuner (Rt) Inspection
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The integrity of the remote tuner (RT) cannot be determined from a single part. When inspecting the remote tuner (RT), perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the DTC inspection for the connectivity master unit (CMU) and verify if any DTCs related to the remote tuner (RT) is detected. (See DTC INSPECTION
.)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to the [DTC TABLE [CONNECTIVITY MASTER UNIT (CMU)]] in the workshop service information)