Parking Assist Unit (Optical) Inspection
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The integrity of the parking assist unit (optical) cannot be determined from a single part. When inspecting the parking assist unit (optical), perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the DTC inspection for the parking assist unit (optical) and verify if any DTCs related to the parking assist unit (optical) is detected. (See DTC INSPECTION
.)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [PARKING ASSIST UNIT (OPTICAL) (US)] .)