If Bluetooth-enabled device is version 2.1 and later
WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Switch the ignition ON (engine off or on).
- Select "Settings" from the home screen of the center display as shown in the illustration.
- Select the following on the center display.
- [Connectivity Settings]
- [Bluetooth]
- Bluetooth setting ON
- [Pair New Device]
- Verify that the device name (Mazda) and the 6-digit password are displayed on the center display and Bluetooth®-enabled device.NOTE:
- When "Pair New Device" is selected, the connectivity master unit (CMU) searches for a Bluetooth®-enabled device. If the connectivity master unit (CMU) detects a Bluetooth®-enabled device, a 6-digit code is displayed in the center display.
- Verify that "Pairing complete Connection complete" is indicated in the center display.