LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (I-ACTIVSENSE (Service Information)) >> Forward Sensing Camera (FSC) System Operation Record

Forward Sensing Camera (FSC) System Operation Record

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off or on).
  3. Activate the M-MDS and perform the following procedure.
    1. Press [Start] to start the vehicle identification.
    2. Press the [Toolbox] tab.
    3. Press the [Diagnosis] icon.
    4. Press [Operational records].
    5. Press [i-ACTIVSENSE].
    6. Press [Run] for [Reading Operation records of FSC].
  4. Display the FSC operation records according to the directions on the M-MDS screen.
scientia non olet · About LEMON Manuals